Products » Cable Satellite Terrestrial Codecs General » DVB-S demodulator / DSNG demodulator » DVB-S demodulator / DVB-DSNG demodulator diagram Block diagram DVB-S demodulator / DVB-DSNG demodulator Safari plug-in Safari Plug-in 
 
 

DVB-S demodulator / DSNG demodulator (CMS0048)

v9.9: May, 2017

  • Improved FPGA specific PAR frequency results.

v9.7: January, 2017

  • Added pipelining options for higher PAR frequency results.

v9.5: November, 2016

  • Quartus PAR improvements.

v9.3: July, 2016

  • Quartus QOR improvements.

v9.1: February, 2016

  • Corrected Plscode output when built for DVB-S2 only.

v9.0: January, 2016

  • Pre-Quartus 15.1 compatibility updates.
  • Updated QSYS interconnect to decoder.

v8.9: January, 2016

  • Quartus 15.1 updates.

v8.8: November, 2015

  • Added ADC databus width selection.

v8.4: September, 2015

  • Improved low-SNR timing acqusition and tracking.

v5.5: April, 2015

  • Quartus megacore updates.

v4.2: October, 2014

  • Added ArriaV and StratixV support.

v4.0: September, 2014

  • Documentation Updates.

v3.2: June, 2013

  • Added trellis mode output port.

v2.9: March, 2013

  • Increased resolution of the DVB-S/DSNG FEC timeout register.

v2.3: October, 2012

  • DVB-S/DSNG acquistion time improvements.
  • RAM usage optimisations.

v2.1: October, 2012

  • Fixed issue with Altera megacore license file.

v2.0: October, 2012

  • Added optional external pre-processor interface.
  • Added DVB-S/DSNG wide-band equalisation.
  • Improved DVB-S/DSNG automatic QAM detection and re-acquistion.

v1.8: June, 2012

  • Added CNIR estimate output port.
  • Added CycloneIV support.

v1.7: March, 2012

  • Added bypass DVB-S/DSNG FEC software option.

v1.6: February, 2012

  • Improved DSNG high code-rate performance.

v1.5: February, 2012

  • Altera QSYS Avalon-interface update.

v1.4: February, 2012

  • Improved acquistion with large frequency offsets.

v1.3: January, 2012

  • Improved DSNG re-acquistion due to signal loss.
  • Re-added Stratix-II support.

v1.2: January, 2012

  • Added software selectable filter roll-off support.

v1.1: January, 2012

  • Added Arria-II support.